|
|
These transparent, ready to use ,disposable petri dishes are made of optically clear, non-toxic, polystyrene. these petri dishes packed individually in polyethylene bags are sterilized by radiation/E.T.O. |
 |
|
|
|
Lyzer Trinocular Petrological Microscope : With tripple revolving nose piece, co-axial coarse and fine motion, circular stage, rotatable in 360 degree, graduated with vernier reading up to 0.1 degree with provision for centring by two knobs located just below the circular stage,polariser with swing out system. Compact analyser head having iris diaphragm, Bertand lens, Analyser rotating ring and half/full wave compensator with following optical combination.
Objectives 5x, 10x and 45x (SL)
Eyepieces WF10 x (Pair) |
|
 |
|
| PH - 001 HOT EXTRACTION ENQUIPMENT : |
|
LYZER HOT EXTRACTION ENQUIPMENT : Extraction capacity 200 ml. flask capacity 500 ml. with standard joints made from Borosil glass.
(b) -do- fitted with Heating Mantle, Stand & Clamp |
|
|
|
| PH - 002 CONICAL PERCOLATORS : |
|
LYZER CONICAL PERCOLATORS : Capacity 100 ml. with lid drain cock, stainless steel sieve on 3-leged stand. |
|
|
|
| PH - 003 TINCTURE PRESS : |
|
LYZER TINCTURE PRESS : Extra heavy for making tinctures, decotious infusions etc. cap. 1 Lt., stainless steel disc, with screw, stainless steel innoperroated vessel. |
|
|
|
| PH - 004 HAND GRINDING MILL : |
|
LYZER HAND GRINDING MILL : Table fixing with hardened grinding discs, provisions for coarse and fine grinding big size. |
|
|
|
| PH - 005 MOTOR DRIVEN DISINTEGRATOR : |
|
LYZER MOTOR DRIVEN DISINTEGRATOR : Laboratory size, hammer type, with H.P. heavy duty motor (single phase) 220 volts, 50C/S A.C. consisting of four steel hammers fixed to a disc of 3” in dia 1” thick through which passes a shaft being revolved at 3000 R.P.M. The hammers are enclosed in a C.I. durm, the sides and upper surface of which are roughened. The inner surface is undulating. The lower part of drum is made of detachable, screen (sieves) of different mesh size (a set of three sieves of coarse, medium and fine a supplied. Hopper is made of heavy gauge m.s. sheet, Built on angle iron frame of size 24” x 14” x 20” high.
-do- mounted on Iron Base. Size 18” x 12” (small size) |
|
|
|
| PH - 008 SPARE DIE & PUNCH : |
|
LYZER SPARE DIE & PUNCH : ( Round shape)
(i) 6mm
(ii) 9 mm
(iii) 12 mm |
|
|
|
| PH - 009 TABLE COATING PAN : |
|
LYZER TABLE COATING PAN : 12” dia, stainless steel : The machine is worked by oil immeresed gearbox with 1/4 H.P. Motor driven, Air blower is operated independently and air is thermostatically controlled to give temperature 30° to 110°C. Switches for motor blower heat and thermostal are fixed on a penal with neon indicator also mains lead with 15 amp plug provided. |
|
|
|
|
|
LYZER POLISHING PAN :Detachable polishing pan for use with polishing is made of mild steel painted and provided with inner lining of superior canvas cloth, inner dia 12”x 8” high with operating on 7” dia neck. |
|
|
|
