|
Lyzer Chromotagraphy Chamber:Glass panelled frame work is made out of teak wood frame finish with clear lacquer polish. The interior is wax coated to make it resistant to the most of the solvents. The lid is also glass paneled and is tightened with clamps and has sealing gaskets. Castor wheels have been provided for easy movements of the equipment. One acrylic tray has been provided for Chemicals. Complete with troughs and glass rods. |
|
|
|
Dispensing Laminar Air Flow Unit |
|
Lyzer Dispensing Laminar Air Flow Unit Chamber fabricated out of stainless steel (Grade SS-304) framework of of M.S. tubulars & with thick epoxy coating. The chamber has a re-circulatory type design for safety of the operator and to avoid the inter-mixing of the material / sample to be dispensed Features Efficiency :99.97% (or above) down to 0.3 microns Blower Unit : Centri-balanced, centrifugal motorized blower with ISI (IS996-1979) marked motor, 1/3 HP 1440 RPM Discharge : Air volume 90cfm ±10% Noise Level : Below 65dB Illumination : 40W Fluorescent tube
Unit complete with following : H.E.P.A. Filter, Pre Filter, Centri-Balanced Centrifugal Air Succession blower unit, Fluorescent Tube Light, Ultra Voilet Tube, Static Pressure manometer (Acrylic) front PVC curtains with channels, safety grills for H.E.P.A. and pre filters. Standard Dimensions work chamber 900mm x 600 x 1850mm 1200mm x 750 x 1850mm
|
|
|
|
|
Lyzer Fume Hood cabinet: Fabricated out.of thick c.r.c.a. sheet OR Wooden Board, double chamber, outer triple layer enamel painted and inner finished in apoxy & lined with compressed a asbestos sheet with strong blower exhaust system, light arrangement & counter balanced sliding sash. To work on 220 / 230V AC 50 Hz. Power plug with socket provided.
Size- Wdt. Dpt. Ht. Exhaust Duct No. 122
01 4' x 2.6'x 31/2' 3" dia 02 5' x 3' x 31/2' 4" 03 6' x 3' x 31/2' 4" |
|
|
|
Fume Hood Stainless Steel |
|
Lyzer Fume Hood (Stainless Steel):Fabricated out of Stainless Steel (316 Quality) sheet, angular framework with strong centrifugal blower exhaust system. With strong blower exhaust system, light arrangement & counter balanced sliding sash. Power plug with socket provided inside the chamber. To work on 220/230V AC 50 Hz.
Size- Wdt. Dpt. Ht. Exhaust Duct
01 4' x 2' 6" x 3' 6" 3" dia 02 5' x 3' x 3'6" 4" dia 03 6' x 3' x 3'6" 5" dia |
|
|
|
|
Lyzer Fumigation chamber:Versatile chamber for fumigating for sterilization with insecticide for preservation clothes, plants, old books etc. Made of sturdy board, mica covered, Epoxy coated from inside with fume circulator of electric motor. Top cover tightened with clamps. One drawer is provided for keeping perti-dish for fumigants chemical. Castor wheel provided for easy movement.Sizes:- 01 90 x 60 x 80 cm.(36" x 24" x 32") 02 75 x 50 x 65 cm.(30" x 20" x 26") 03 50 x 40 x 55 cm.(24" x 16" x 22") |
|
|
|
|
Lyzer Inoculation Chamber:Made of seasoned teakwood with thick plyboard on top & bottom and 3 mm plywood on back. Thick non-rattling glass provided on two sides and front slanting glass door. Front side slanting provided : with openable glass door for convenient view of the specimens placed inside. Lower portion with round openings on front and one window on side. Inside painted white. Provided with one flourscent tube and one Ultra Violet tube. Lacquer polish. |
|
|
|
|
Lyzer Horizontal Laminar Air Flow Module LT-61 is fabricated out of reinforced pest and wheather resistance board which is clad in white sunmica laminated sheet. Enviormental Air is drawn by two balanced blowers through Pre filters retaining more than 75% particles larger than 5 microns and thrown to work chamber through high efficency (DOP Tested) HEPA filter retaining particulate and biological contaminants larger than 0.3 microns. Table top is covered with Stainless steel(TOP).The side panels and front door is made of thick and clear imported plexi glass sheet, waorkable on 220V AC mains, work chamber is equipped with following: - Ultra Voilet Tube
- Fluorscent Tube
- Gas Cock
- Manometer
- CR fitting
Available with Following Different Sizes and Models:- Work chamber SIZE Models |
|
|
|
|
Lyzer Vertical laminar Air Flow:Ultra Clean AirWork Station, Vertical type, Complete S.S.fabrication OR Wooden board, all sides covered with Mica, Work stage thoroughly lined with Stainless Steel (S.S. -304 or 316) with illumination by fluorescent tube lights. The unit is complete with H.E. P.A. filtered clean exhaust duct. Efficiency u to 99.97%, retaining particles up to the size oF0.03 micron. To work on 220 / 230V AC 50 Hz. |
|
|
|
Vertical Laminar Air Flow |
|
Lyzer Vertical Laminar Air Flow:Ultra Clean AirWork Station, Vertical type, made of sturdy board, all sides covered with Mica, Work stage thoroughly lined with Stainless Steel (S.S. -304 or 316) with illumination by fluorescent tube lights. The unit is complete with H.E. P.A. filtered clean exhaust duct. Efficiency u to 99.97%, retaining particles up to the size oF0.03 micron. To work on 220 / 230V AC 50 Hz. |
|
|
|