LYZER METTLER BALANCE (IMPORTED) :
a.Analyticla Balance Model AB 104-S:
Capacity : 101g Readability : 0.1mg
b.Analyticla Balance Model AB 205-S:
Capacity : 210g Readability : 0.1mg
c.Precision Balance Model PB 303-S:
Capacity : 310g Readability : 1mg
d.Precision Balance Model PB 303-SDR
Capacity : 60/310g Readability : 1mg/10mg
Movable fine range.
WE ARE DEALING WITH OTHER STANDARD COMPANY PRECISION & ANALYTICAL BALACES OF DIFFERENT  CAPACITIES & ACCURACY (INDIAN & IMPORTED)MAKE LIKE PRECISE SWISS MAKE, OHAUS, USA MAKE, SHIMADZU, JAPAN, AFLOSET, USA, CONTECH INDIAN MAKE ETC. ETC. SO ASK FOR DETAIL SPECIFICATION & RATES. 

LYZER DEHUMIDIFIER :It is compact portable unit contrlling humidity upto 30% with an accuracy of +3%. This is available in 1 tonne capacity to cover 100 sq. ft. & 1.5 tonne capacity to cover approx.150sq. ft of floor area. Supplied along with the German Hygrometer Available in following sizes :
1.1 tonne
2.1.5 tonne 

LYZER PAPER AND GEL ELECTROPHORESIS APPARATUS :
Paper strip model the electrophoesis cabinet is made to clear transparent plastic (Perspex sheet) 16" long 9 width 4" high, effective width i.e. maximum usable width of paper carrier 7". The upper surface of teh  plateform which supports the paper strip carrier and the electrode troughs are finished with black surfaces for constrast. A recessed safety inter lock switch breaks the current to both electrodes when the cabinet cover is fitted. Electrode troughs have a capacity of 550ml each and provided with two transverse baffles to minimize diffusion of buffer in electrode section of trough with buffer which is in contact with end of paper strips. The polarity of the electrode is indicated by two pilot lamps fitted with levelling screws to facilitate levelling. Supplied complete with cord and terminals connecting to the power supply, stablised D.C. power supply unit 0-300 volts and 100 mA is provided with apparatus.
b)Electrophoresis apparatus paper strip model without power supply unit.

LYZER PHOTOMICROGRAPHIC EQUIPMENT (TRINOCULAR MICROSCOPE WITH MICRO PHOTOGRAPHY SYSTEM) It consists of Trinocular Research microscope Incorporating latest coaxial coarse & fine focussing system supported on ball bearing guides with highly sensitive slow motion reading to 0.002mm. The sturdy microscope stand with ball bearing quardruple nose piece has both sides graduated mechanical stage with low position coaxial control for convenient side manipulation. The microscope has built in halogen illumination (6V-20W) & a high grade condenser system to provide brilliant illumination with solid state light control. Supplied with high transmission trinocular head with multilayer coated prisms to provide optimum contrast & an excellent image quality suitable for microphotography.
a)Supplied with all imported din standard optics assembled by rolex.
Eyepiece: H 5x or H 15x(1 pair) & W.F. 10x(wide field) (1 pair)
objectives : 5x, 10x,45x,100x Objectives.
b)Supplied with quadruple nose piece and following all Imported Japanese Optics.
Eyepiece : 10x W.F. (wide field) 1 Pair.
Objectives : 5x,10x,45x,100x Oil immersion (spring loaded)
Note : The above microscope supplied with following c or d camera as per requirement.
c)Comprising of Imported 35mm SLR camera body with standard microscope adopeter for photomicrography, supplied complete with cable release and SP-5x Eye-Piece.
d)
i)Comprising of an Imported 35mm SLR camera body with latest shutter speed with control -1 No.
ii)Bayonet mount for fixing camera to side viewfinder-1 No.
iii)Special view finderfor 100% light transmission with focussable eyepiece to give exact picture size focussing -1 No.
iv)Photo eyepiece SP-5x:-1No.
v)Cable Release : 1 No.
Complete as above in plywood storing cabinet.
(Extra charges when supplied with standard camera lens for routine photography.)

LYZER EYE PIECE WITH POINTER : Huygenian Eye-Piece for microscope all type with velvet box
a) 5x 
b) 10x 
c) 15x 

LYZER CAMERALUCIDA: (Prismatic) Lemon optical glass prism specially designed hangs over the eye-piece of the microscope. The pencil on the graph is visible moving on the image is drawn on the graph, very compact in design, Prism will be silver coated one side and it will be packed in velvet box.
b) Mirror Type : with this unit it is possible to draw the image seen in the microscope. The mirror reflects the pencil point image into an abbe prism clamped over the eye-piece and superimposes it up on the specimen image. The prism box is hinged for quick change of eye-piece for normal observation complete in velvet box. 

LYZER MECHANICAL FLASK SHAKER : A series of multi-purpose duty shakers, complete with carrier for flasks test tube racks, bottles etc. Speeds are uneffected by normal live voltage fluctuations or loading within specified limit.
Carrier size        Strokes per minute  Motor H.P. Type
1.20"x13"x4" 275 0.25 Open body
2.20"x13"x4" 275 -do- Coverred body
3.20"x13"x4" 150 to 250r.m.p. -do- Open body
4.20"x13"x4" -do- -do- Coverred body
5.31"x17"x3" -do- -do- -do-
6.36"x18"x4" -do- -do- -do-
Note : Timer can be fitted on request at extra cost.

LYZER B.O.D. INCUBTOR : Designed for low temp. incubation and routine determination of Biochemical Oxygen Demand (B.O.D.) The unit is composed for tripple walled chamber with a thick layer of fine glass wool to prevent loss of heat. For lower tempoerature work, a cooling unit is provided at the lower portion of working chamber and heating arrangement has been made in the inner chamber for work at higher temperature.. The temperature varies from 50C to 500C adjustable to any desired point by means of a high precision double action thermo regulator within the variation of 10C. Air Circulation fan has been provided to keep the temperature uniform inside the chamber. Inner chamber is fabricated from thick aluminium anodized shelves are provided. Toggle switch, thermo-regulator, mercury thermometer and indicating lamps are located on the instrument for easy handing end visibility Complete with automatic interna light, connecting cord & plug to work on 220 Volts A.C.
Inner Chamber size       All./S.Steel
a)825x500x415mm  (33"x20"x16.5") ................
(6.1 c.ft.)
b)865x565x565mm  (34.5x22.5x22.5) ................
(10 c.ft.)
c)900x650x575mm  (36"x26"x23") ................
(12 c.ft.) 

LYZER PHARMACOGNOSY SLIDES : 35mm. Projector slides (2"X2") Pkt. of 100 sides fix in a beautiful album.