PIPETTE STAND(VERTICAL),PIPETTE STAND (HORIZONTAL),PIPETTE STAND (94PIPETTES-ROTARY),PIPETTE PUMP,Pin Lamp,Physical weight Box :,Physical balance :,PH

Products Catalogue

Pharmaceutical

Pharmacognosy

Lyzer Friability Test Appratus: Used to determine the durability and abrasivness of tablets. A transparent perpex drum (made of imported perspex sheet 6.4 mm thick) 300 mm dia x 35 mm. deep and -white cover disc and nut, also a shaped radial fixed blade which carries the tablets along with it up to the central height and lets them off while the drum is rotating. Thus the tablets rub against each other without any hard impact. The drum rotates at a fixed speed of 30 R.P.M. by a geared motor and the rotation period is controlled by a timer (imported time switch duration I to 15 minutes) per determined end preset. The motor unit is housed in a shaped steel cabinet with shaft extended on one side upon which the drum rotates. Switches with neon indicators and time switch are fitted on a panel and provided work on 220 volts 50 C/s A.C.Digital models are also available.

(A) -do- same as above, but with double drum.

PHASE CONTRAST EQUIPMENT

Lyzer Phase Contrast Equipment(Imported): Suitable for all type of biological microscopes, turret type with four phase objectives P10x,P25x,P40x and P100x oil, with telescopic eye piece and two coloured filters in aluminium box packing.

Physical balance :

Physical Balance : Varanasi type, with 7 stone atates, fitted in nicely polished teak wood case with sunmica base and divided doors, Capacity 250 gm, sensitivity 1 mg.

Physical weight Box :

Physical weight Box : Brass C.P. weights, in nicely polished seasoned wooden box, tested accurate.
1 mg to 100gm, 200gm, 500gm, 1000gm, 50gm

Pin Lamp

Lyzer Sub Stage Microscope Lamp : ( Pin type) Workable on direct 220 Volts Ac/Dc mains heaving blue and white filters.

PIPETTE PUMP

Fast release pipetting device for precise pipetting & zip quick emptying. The knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning.

Size : 2ml, 10ml, 25ml

PIPETTE STAND (94PIPETTES-ROTARY)

Moulded in polypropylene this unique stand holes a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipettes. the lower rotating disc has four concentric troughs with tapered side and open bottom which cradle the pipettes tips protectively and permit water drops to run off. the upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. this stand can be easily disassembled and reassembled.

PIPETTE STAND (HORIZONTAL)

The detacable stand can hold 12pipettes,6on each side,in a horizontal position. moulded in polypropylene,this autoclavable stand has two sides which are attached to each other with three metallic rods coated with polypropylene. this stand can beeasily disassembled for space saving storage.

PIPETTE STAND(VERTICAL)

This is a stable non-corrosive,detachable stand which can hold 28 pipettes with maximum dia 14mm. the heavy base measures 225mm in diameter and a polypropylene coated square rod measuring 375mm in length is screwed into the base. the top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. these disc can be adjustedon the rod according to the length of the pipette. the arrows provided on the disc should be kept paralled to ensure that corresponding holes are being centered.