Product Category
  Binocular Microscopes
  Cenrifuge Machines
  Clean Air Equipments
  Comparison Microscopes
  Compound Microscopes
  Digital Microscopes
  Dissecting Microscopes
  Engineering Models
  ENT Microscope
  Flourscent Microscope
  Inverted Microscopes
  LYZER Instruments
  Metallurgical Microscopes
  Microtomes
  Mixers and Blenders
  Models Biological & Pharmacognosy 3D
  Monocular Microscopes
  Multi Head Microscopes
  Operating Microscope
  Ore Microscopes
  Over Head Projectors/ Slide Projectors
  Petrological Microscopes
  Pharmacy Equipments
  Physics/Chemistry/Educational
  Polarising Microscopes
  Profile Projectors
  Projection Microscopes
  Refractrometers & Polarimeters
  Stereoscopic Microscopes
  Tissue Culture Rack
  Trinocular Microscopes
 
Products Catalogue
 lyzer chemical balance : ph - 0148
 Double pans weighting capacity 200 gms accuracy 0.2 mg; Sunmica Base. 
 
 lyzer clearity test equipment for ampoules:ph - 028
 Milk white and black screen fitted on a base board with diffused light arrangement overall dimensions are 23”x15”x18”high. A stainless upright with adjustable slide arm with clamp magnifier main cor and plug.
 lyzer collapsible tube filling machine :lyzer collapsible tube filling machine : ph - 019
Stroke type, barrel and piston arrangement with strock setting for various capacity of filling of tubes (from 5 gms to 50 gms.) detachable nozles provided for each separate capacity. All contact parts are of stainless steel also stainless steel holder. Built on cast iron body, hand lever operated.
 
 lyzer disintegration test app, I.p. standard (double basket):ph - 013
The test equipment work on up and down movement of tablet in medium of water kept at 37°C. Built on a steel cabinet of 14”x12”x9” high which housed a geared motor for the vertical shaft drive the shaft moves up and down by 7.5 cms at speed of 30 per minute. On the upper end of the shaft fitted a horizontal strip with clamp on either side. These clamps hold glass vessels open at both ends and with stainless steel wire gauge with rubber rings at the lower end, which dips in water. Two independently thermostatically controlled hot plate rating 65 watt are fixed on the top of the cabinet upon which beakers of 1000 ml size are net filled with water. Temperature is mainted at 37°C with and accuracy of 1°C. Independent switches with neon indicators for motor hot plates are fitted on a panel. Mains fuse with two meters mains cord and plug provided. Work on 220 volts A.C. mains.
 lyzer dissolution rate test equipment : ph - 017
  The apparatus consists of 4 parts. A water bath with 500 watt heater covered 100 ml vessel made from Borosil glass and an digital temperature control. Variable speed motor, with 30cms longs stainless steel shaft. A cylinderical stainless steel basket and a membrance fixing attachment, water bath is made of imprted thick Acrylic sheet with transparent cover at top. Temperature of the bath is maintained at 37°C with an accuracy of ±1°C.A cylinderical glass vessel of 1000ml capacity with slightly concave bottom has a flenged edge at the top of to accept a fitted cover having four holes. One hole placed in the an electronic speed regulating device that allows the speed to be varied from 25 to 250 R.P.M. The shaft is 6mm dia. 30 cms on with basket fitted at end rotates smoothly and without any percetible wobble. The basket consist of two parts one of which is attached to the shaft. It is of solid metal except for 2 removal of the lower part of the basket is fabricated of stainless steel mesh formed into cylinderical 3.6 cms x 2.5 cms dia. The equipment is workable on 220 volts 50 C/S A.C.
 (a) -do- same as above but Analog type single stage.
 (b) -do- same as above analog type double stage.   
 lyzer friability test apparatus :ph - 018
 Used to determine the durability and abrasivness of tablets. A transparent perpex drum (made of imported perpex sheet 6.4 mm thick) 300 mm dia x  35 mm deep and white cover disc and nut, also a shaped radial fixed blade which carries the tablets along with it up to the central height and lets them off while the drum is rotating. Thus the tablets rub against each other without any hard impact. The drum rotates at a fixed speed of 30 R.P.M. by a geared motor and the rotation period is controlled by a timer (imported time switch duration 1 to 15 minutes) per determined end preset. The motor unit is housed in a shaped steel cabinet with shaft extended on one side upon which the drum rotates. Switches with neon indicators and time switch are fitted on a panel and provided work on 220 volts         50 C/s A.C.
 (b) -do- same as above, but with double drum.
 
 lyzer hand grinding mill : PH - 004
Table fixing with hardened grinding discs, provisions for coarse and fine grinding big size.
 lyzer incubator shaker:ph - 0145
   Temperature upto 80°C accuracy  ±1°C working size 16x35x30 cms.
 Rack size 28x23 cms. to hold flask or tubes.
 Note :- Other sizes made to order.
 lyzer millipore filter holder assembly :ph - 037
  Vaccum type flask and clamp.
  Membrance Funnel Flask with neon-
   dia mm  cap. ml  cap ml  centtrene corkfitting
 a) 25mm  25  250  Rs.
 b) 25mm  50  500  Rs.
 c) 47mm  300  1000  Rs.
 lyzer ointment spatula: ph - 032

 stainless steel 6”x1” vide blade, stout flexable, made from imported stainless steel with superiour wooden handle.
 


Page(s): 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | 77 | 78 | 79 | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97 | 98 | 99 | 100 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 108 | 109 |

Copyright@ all rights are reserved.